Skip Navigation Website Accessibility
P: 605.838.5447  |   
  • 1016 W 41st St., Sioux Falls, SD 57105  |  CONTACT

For sale we have a nice K-20 built by Taylor in their Santee, CA factory back in the day. Featuring koa back, sides and top, mahogany neck, ebony fb and bridge. Its been well cared for over the years. Play wear is minimal. Frets look like new.  This is the original version of the K-20 which had pearl diamond fingerboard markers. The only cosmetic issues of note are a few finish checks in the gloss finish (not unexpected considering the age of the instrument.) There are minor/light scratches on the pickguard and the headstock face plate from string changes.  That's pretty much it with the the guitar as far as finish issues. Structurally speaking the instrument is excellent. No cracks, no dents, no channels in the fret board or frets. All binding is intact and solid. Neck angle is good. Plays great, sounds great, looks great. 

Please note that the mic you can see in the sound hole is part of the original Fishman Blender pickup system that was installed when the instrument was new. It will be removed when the guitar sells. We can also offer installation of a modern pickup system at a reasonable price if you are interested, and carry LR Baggs, K&K, Fishman, Lawler, and Seymour Duncan. 

Fingerboard Radius: 14"
Neck Width at Nut: 1.725"
Neck Width at 12th Fret: 2.10"
Neck Depth at 1st Fret: .850"
Neck Depth at 10th Fret: .942"
String Spacing at Nut: 1.40"
String Spacing at Bridge: 2.20"
High E Height at 12th Fret: 4/64"
Low E Height at 12th Fret: 5/64"

Thanks for looking.